source: trunk/src/SDLineFinder.cc@ 297

//#---------------------------------------------------------------------------
//# SDLineFinder.cc: A class for automated spectral line search
//#--------------------------------------------------------------------------
//# Copyright (C) 2004
//# ATNF
//#
//# This program is free software; you can redistribute it and/or modify it
//# under the terms of the GNU General Public License as published by the Free
//# Software Foundation; either version 2 of the License, or (at your option)
//# any later version.
//#
//# This program is distributed in the hope that it will be useful, but
//# WITHOUT ANY WARRANTY; without even the implied warranty of
//# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
//# Public License for more details.
//#
//# You should have received a copy of the GNU General Public License along
//# with this program; if not, write to the Free Software Foundation, Inc.,
//# 675 Massachusetts Ave, Cambridge, MA 02139, USA.
//#
//# Correspondence concerning this software should be addressed as follows:
//#        Internet email: Malte.Marquarding@csiro.au
//#        Postal address: Malte Marquarding,
//#                        Australia Telescope National Facility,
//#                        P.O. Box 76,
//#                        Epping, NSW, 2121,
//#                        AUSTRALIA
//#
//# $Id:
//#---------------------------------------------------------------------------


// ASAP
#include "SDLineFinder.h"

// STL
#include <iostream>

using namespace asap;
using namespace casa;
using namespace std;
using namespace boost::python;

// SDLineFinder  -  a class for automated spectral line search

SDLineFinder::SDLineFinder() throw() : edge(0,0)
{
  // detection threshold - the minimal signal to noise ratio
  threshold=3.; // 3 sigma is a default
  box_size=1./16.; // default box size for running mean calculations is
                  // 1/16 of the whole spectrum
  // A minimum number of consequtive channels, which should satisfy
  // the detection criterion, to be a detection
  min_nchan=3;     // default is 3 channels
}

SDLineFinder::~SDLineFinder() throw(AipsError) {}

// set scan to work with (in_scan parameter), associated mask (in_mask
// parameter) and the edge channel rejection (in_edge parameter)
//   if in_edge has zero length, all channels chosen by mask will be used
//   if in_edge has one element only, it represents the number of
//      channels to drop from both sides of the spectrum
//   in_edge is introduced for convinience, although all functionality
//   can be achieved using a spectrum mask only   
void SDLineFinder::setScan(const SDMemTableWrapper &in_scan,
               const std::vector<bool> &in_mask,
               const boost::python::tuple &in_edge) throw(AipsError)
{
  try {
       scan=in_scan.getCP();
       AlwaysAssert(!scan.null(),AipsError);
       if (scan->nRow()!=1)
           throw AipsError("SDLineFinder::setScan - in_scan contains more than 1 row."
                           "Choose one first.");       
       mask=in_mask;
       if (mask.nelements()!=scan->nChan())
           throw AipsError("SDLineFinder::setScan - in_scan and in_mask have different"
                           "number of spectral channels.");

       // number of elements in the in_edge tuple
       int n=extract<int>(in_edge.attr("__len__")());
       if (n>2 || n<0)
           throw AipsError("SDLineFinder::setScan - the length of the in_edge parameter"
                           "should not exceed 2");
       if (!n) {
           // all spectrum, no rejection
           edge.first=0;
           edge.second=scan->nChan();
       } else {
           edge.first=extract<int>(in_edge.attr("__getitem__")(0));
           if (edge.first<0)
               throw AipsError("SDLineFinder::setScan - the in_edge parameter has a negative"
                                "number of channels to drop");
           if (edge.first>=scan->nChan())
               throw AipsError("SDLineFinder::setScan - all channels are rejected by the in_edge parameter");
           if (n==2) {
               edge.second=extract<int>(in_edge.attr("__getitem__")(1));
               if (edge.second<0)
                   throw AipsError("SDLineFinder::setScan - the in_edge parameter has a negative"
                                   "number of channels to drop");
               edge.second=scan->nChan()-edge.second;
           } else edge.second=scan->nChan()-edge.first;
           if (edge.second<0 || (edge.second+edge.first)>scan->nChan())
               throw AipsError("SDLineFinder::setScan - all channels are rejected by the in_edge parameter");
       }       
  }
  catch(const AipsError &ae) {
       // setScan is unsuccessfull, reset scan/mask/edge
       scan=CountedConstPtr<SDMemTable>(); // null pointer
       mask.resize(0);
       edge=pair<int,int>(0,0);
       throw;
  }
}

// search for spectral lines. Number of lines found is returned
int SDLineFinder::findLines() throw(casa::AipsError)
{
  const int minboxnchan=4;
  if (scan.null())
      throw AipsError("SDLineFinder::findLines - a scan should be set first,"
                      " use set_scan");
  DebugAssert(mask.nelements()==scan->nChan(), AipsError);
  lines.resize(0); // search from the scratch
  
  max_box_nchan=int(scan->nChan()*box_size); // number of channels in running
                                              // box

  if (max_box_nchan<2)
      throw AipsError("SDLineFinder::findLines - box_size is too small");

  scan->getSpectrum(spectrum);
  
  // fill statistics for initial box
  box_chan_cntr=0; // no channels are currently in the box
  sum=0;           // initialize statistics
  sumsq=0;
  int initial_box_ch=edge.first;
  for (;initial_box_ch<edge.second && box_chan_cntr<max_box_nchan;
        ++initial_box_ch)
       advanceRunningBox(initial_box_ch);
    
  if (initial_box_ch==edge.second)       
      throw AipsError("SDLineFinder::findLines - too much channels are masked");

  // actual search algorithm
  is_detected_before=False;

  if (box_chan_cntr>=minboxnchan) 
      // there is a minimum amount of data. We can search in the
      // half of the initial box   
      for (int n=edge.first;n<initial_box_ch-max_box_nchan/2;++n)
           processChannel(n);                      
  
  // now the box can be moved. n+max_box_nchan/2 is a new index which haven't
  // yet been included in the running mean.
  for (int n=initial_box_ch-max_box_nchan/2;n<edge.second;++n) {
      advanceRunningBox(n+max_box_nchan/2); // update running mean & variance
      if (box_chan_cntr>=minboxnchan) // have enough data to process
          processChannel(n);
      else processCurLine(); // just finish what was accumulated before
  }
  return int(lines.size());
}

// supplementary function to control running mean calculations.
// It adds a specified channel to the running mean box and
// removes (ch-max_box_nchan+1)'th channel from there
// Channels, for which the mask is false or index is beyond the
// allowed range, are ignored
void SDLineFinder::advanceRunningBox(int ch) throw(AipsError)
{
  if (ch>=edge.first && ch<edge.second)
      if (mask[ch]) { // ch is a valid channel
          ++box_chan_cntr;
          sum+=spectrum[ch];
          sumsq+=square(spectrum[ch]);          
      }
  int ch2remove=ch-max_box_nchan;
  if (ch2remove>=edge.first && ch2remove<edge.second)
      if (mask[ch2remove]) { // ch2remove is a valid channel
          --box_chan_cntr;
          sum-=spectrum[ch2remove];
          sumsq-=square(spectrum[ch2remove]);  
      }
}

// test a channel against current running mean & rms
// if channel specified is masked out or beyond the allowed indexes,
// false is returned
Bool SDLineFinder::testChannel(int ch) throw(exception, AipsError)
{
  if (ch<edge.first || ch>=edge.second) return False;
  if (!mask[ch]) return False;
  DebugAssert(box_chan_cntr, AipsError);
  Float mean=sum/Float(box_chan_cntr);
  Float variance=sqrt(sumsq/Float(box_chan_cntr)-square(mean));
  /*
  if (ch>3900 && ch<4100)
    cout<<"Tested "<<ch<<" mean="<<mean<<" variance="<<variance<<" sp-mean="<<spectrum[ch]-mean<<endl;
  */
  return fabs(spectrum[ch]-mean)>=threshold*variance;
}

// process a channel: update cur_line and is_detected before and
// add a new line to the list, if necessary
void SDLineFinder::processChannel(int ch) throw(casa::AipsError)
{
  try {
       if (testChannel(ch)) {
           if (is_detected_before)
               cur_line.second=ch+1;
           else {
               is_detected_before=True;
               cur_line.first=ch;
               cur_line.second=ch+1;
           }
       } else processCurLine();   
  }
  catch (const AipsError &ae) {
      throw;
  }  
  catch (const exception &ex) {
      throw AipsError(String("SDLineFinder::processChannel - STL error: ")+ex.what());
  }
}

// process the interval of channels stored in cur_line
// if it satisfies the criterion, add this interval as a new line
void SDLineFinder::processCurLine() throw(casa::AipsError)
{
  try {
       if (is_detected_before) {                      
           if (cur_line.second-cur_line.first>min_nchan) {
               // it was a detection. We need to change the list
               Bool add_new_line=False;
               if (lines.size()) { 
                   for (int i=lines.back().second;i<cur_line.first;++i)
                        if (mask[i]) { // one valid channel in between
                                //  means that we deal with a separate line
                            add_new_line=True;
                            break;
                        }
               } else add_new_line=True; 
               if (add_new_line) 
                   lines.push_back(cur_line);
               else lines.back().second=cur_line.second;                   
           }
           is_detected_before=False;
       }      
  }
  catch (const AipsError &ae) {
      throw;
  }  
  catch (const exception &ex) {
      throw AipsError(String("SDLineFinder::processCurLine - STL error: ")+ex.what());
  }
}

// get the mask to mask out all lines that have been found (default)
// if invert=true, only channels belong to lines will be unmasked
// Note: all channels originally masked by the input mask (in_mask
//       in setScan) or dropped out by the edge parameter (in_edge
//       in setScan) are still excluded regardless on the invert option
std::vector<bool> SDLineFinder::getMask(bool invert)
                                        const throw(casa::AipsError)
{
  try {
       if (scan.null())
           throw AipsError("SDLineFinder::getMask - a scan should be set first,"
                      " use set_scan followed by find_lines");
       DebugAssert(mask.nelements()==scan->nChan(), AipsError);
       /*
       if (!lines.size())
           throw AipsError("SDLineFinder::getMask - one have to search for "
                           "lines first, use find_lines");
       */                          
       std::vector<bool> res_mask(mask.nelements());
       // iterator through lines
       std::list<std::pair<int,int> >::const_iterator cli=lines.begin();
       for (int ch=0;ch<res_mask.size();++ch) 
            if (ch<edge.first || ch>=edge.second) res_mask[ch]=false;
            else if (!mask[ch]) res_mask[ch]=false;
            else {            
                    res_mask[ch]=!invert; // no line by default
                    if (cli==lines.end()) continue;
                    if (ch>=cli->first && ch<cli->second)
                        res_mask[ch]=invert; // this is a line
                    if (ch>=cli->second)
                        ++cli; // next line in the list
                 }
       
       return res_mask;
  }
  catch (const AipsError &ae) {
      throw;
  }  
  catch (const exception &ex) {
      throw AipsError(String("SDLineFinder::getMask - STL error: ")+ex.what());
  }
}

// get range for all lines found. If defunits is true (default), the
// same units as used in the scan will be returned (e.g. velocity
// instead of channels). If defunits is false, channels will be returned
std::vector<int> SDLineFinder::getLineRanges(bool defunits)
                             const throw(casa::AipsError)
{
  try {
       if (scan.null())
           throw AipsError("SDLineFinder::getLineRanges - a scan should be set first,"
                      " use set_scan followed by find_lines");
       DebugAssert(mask.nelements()==scan->nChan(), AipsError);
       
       if (!lines.size())
           throw AipsError("SDLineFinder::getLineRanges - one have to search for "
                           "lines first, use find_lines");
                           
       // temporary
       if (defunits)
           throw AipsError("SDLineFinder::getLineRanges - sorry, defunits=true have not "
                           "yet been implemented");
       //
       std::vector<int> res(2*lines.size());
       // iterator through lines & result
       std::list<std::pair<int,int> >::const_iterator cli=lines.begin();
       std::vector<int>::iterator ri=res.begin();
       for (;cli!=lines.end() && ri!=res.end();++cli,++ri) {            
            *ri=cli->first;
            if (++ri!=res.end()) 
                *ri=cli->second-1;          
       }
       return res;
  }
  catch (const AipsError &ae) {
      throw;
  }  
  catch (const exception &ex) {
      throw AipsError(String("SDLineFinder::getLineRanges - STL error: ")+ex.what());
  }
}