[100] | 1 | """ |
---|
| 2 | This is the ATNF Single Dish Analysis package. |
---|
| 3 | |
---|
| 4 | """ |
---|
[1080] | 5 | import os,sys,shutil, platform |
---|
[226] | 6 | |
---|
[1080] | 7 | # Set up AIPSPATH and first time use of asap i.e. ~/.asap/* |
---|
| 8 | plf = None |
---|
| 9 | if sys.platform == "linux2": |
---|
| 10 | if platform.architecture()[0] == '64bit': |
---|
| 11 | plf = 'linux_64b' |
---|
| 12 | else: |
---|
| 13 | plf = 'linux_gnu' |
---|
| 14 | elif sys.platform == 'darwin': |
---|
| 15 | plf = 'darwin' |
---|
| 16 | else: |
---|
| 17 | # Shouldn't happen - default to linux |
---|
| 18 | plf = 'linux' |
---|
| 19 | asapdata = __path__[-1] |
---|
[1171] | 20 | # Allow user defined data location |
---|
| 21 | if os.environ.has_key("ASAPDATA"): |
---|
| 22 | if os.path.exists(os.environ["ASAPDATA"]): |
---|
| 23 | asapdata = os.environ["ASAPDATA"] |
---|
[1371] | 24 | # use AIPSPATH if defined and "data" dir present |
---|
| 25 | if not os.environ.has_key("AIPSPATH") or \ |
---|
| 26 | not os.path.exists(os.environ["AIPSPATH"].split()[0]+"/data"): |
---|
[1316] | 27 | os.environ["AIPSPATH"] = "%s %s somwhere" % ( asapdata, plf) |
---|
[1171] | 28 | # set up user space |
---|
[1080] | 29 | userdir = os.environ["HOME"]+"/.asap" |
---|
| 30 | if not os.path.exists(userdir): |
---|
| 31 | print 'First time ASAP use. Setting up ~/.asap' |
---|
| 32 | os.mkdir(userdir) |
---|
| 33 | shutil.copyfile(asapdata+"/data/ipythonrc-asap", userdir+"/ipythonrc-asap") |
---|
[1434] | 34 | shutil.copyfile(asapdata+"/data/ipy_user_conf.py", |
---|
| 35 | userdir+"/ipy_user_conf.py") |
---|
[1080] | 36 | f = file(userdir+"/asapuserfuncs.py", "w") |
---|
| 37 | f.close() |
---|
| 38 | f = file(userdir+"/ipythonrc", "w") |
---|
| 39 | f.close() |
---|
[1472] | 40 | else: |
---|
| 41 | # upgrade to support later ipython versions |
---|
| 42 | if not os.path.exists(userdir+"/ipy_user_conf.py"): |
---|
| 43 | shutil.copyfile(asapdata+"/data/ipy_user_conf.py", |
---|
| 44 | userdir+"/ipy_user_conf.py") |
---|
| 45 | |
---|
[1171] | 46 | # remove from namespace |
---|
[1080] | 47 | del asapdata, userdir, shutil, platform |
---|
| 48 | |
---|
[513] | 49 | def _validate_bool(b): |
---|
[226] | 50 | 'Convert b to a boolean or raise' |
---|
| 51 | bl = b.lower() |
---|
| 52 | if bl in ('f', 'no', 'false', '0', 0): return False |
---|
| 53 | elif bl in ('t', 'yes', 'true', '1', 1): return True |
---|
| 54 | else: |
---|
| 55 | raise ValueError('Could not convert "%s" to boolean' % b) |
---|
| 56 | |
---|
[513] | 57 | def _validate_int(s): |
---|
[226] | 58 | 'convert s to int or raise' |
---|
| 59 | try: return int(s) |
---|
| 60 | except ValueError: |
---|
| 61 | raise ValueError('Could not convert "%s" to int' % s) |
---|
| 62 | |
---|
[513] | 63 | def _asap_fname(): |
---|
[226] | 64 | """ |
---|
| 65 | Return the path to the rc file |
---|
| 66 | |
---|
| 67 | Search order: |
---|
| 68 | |
---|
| 69 | * current working dir |
---|
| 70 | * environ var ASAPRC |
---|
[274] | 71 | * HOME/.asaprc |
---|
[706] | 72 | |
---|
[226] | 73 | """ |
---|
| 74 | |
---|
| 75 | fname = os.path.join( os.getcwd(), '.asaprc') |
---|
| 76 | if os.path.exists(fname): return fname |
---|
| 77 | |
---|
| 78 | if os.environ.has_key('ASAPRC'): |
---|
| 79 | path = os.environ['ASAPRC'] |
---|
| 80 | if os.path.exists(path): |
---|
| 81 | fname = os.path.join(path, '.asaprc') |
---|
| 82 | if os.path.exists(fname): |
---|
| 83 | return fname |
---|
| 84 | |
---|
| 85 | if os.environ.has_key('HOME'): |
---|
| 86 | home = os.environ['HOME'] |
---|
| 87 | fname = os.path.join(home, '.asaprc') |
---|
| 88 | if os.path.exists(fname): |
---|
| 89 | return fname |
---|
| 90 | return None |
---|
| 91 | |
---|
[706] | 92 | |
---|
[226] | 93 | defaultParams = { |
---|
| 94 | # general |
---|
[513] | 95 | 'verbose' : [True, _validate_bool], |
---|
| 96 | 'useplotter' : [True, _validate_bool], |
---|
[542] | 97 | 'insitu' : [True, _validate_bool], |
---|
[706] | 98 | |
---|
[226] | 99 | # plotting |
---|
[706] | 100 | 'plotter.gui' : [True, _validate_bool], |
---|
[226] | 101 | 'plotter.stacking' : ['p', str], |
---|
| 102 | 'plotter.panelling' : ['s', str], |
---|
[700] | 103 | 'plotter.colours' : ['', str], |
---|
| 104 | 'plotter.linestyles' : ['', str], |
---|
[710] | 105 | 'plotter.decimate' : [False, _validate_bool], |
---|
| 106 | 'plotter.ganged' : [True, _validate_bool], |
---|
[1022] | 107 | 'plotter.histogram' : [False, _validate_bool], |
---|
[1097] | 108 | 'plotter.papertype' : ['A4', str], |
---|
[710] | 109 | |
---|
[226] | 110 | # scantable |
---|
| 111 | 'scantable.save' : ['ASAP', str], |
---|
[513] | 112 | 'scantable.autoaverage' : [True, _validate_bool], |
---|
[226] | 113 | 'scantable.freqframe' : ['LSRK', str], #default frequency frame |
---|
[1076] | 114 | 'scantable.verbosesummary' : [False, _validate_bool], |
---|
[1422] | 115 | 'scantable.storage' : ['memory', str], |
---|
[1504] | 116 | 'scantable.history' : [True, _validate_bool], |
---|
| 117 | 'scantable.reference' : ['.*(e|w|_R)$', str] |
---|
[226] | 118 | # fitter |
---|
| 119 | } |
---|
| 120 | |
---|
[255] | 121 | def list_rcparameters(): |
---|
[706] | 122 | |
---|
[255] | 123 | print """ |
---|
[737] | 124 | # general |
---|
| 125 | # print verbose output |
---|
| 126 | verbose : True |
---|
[255] | 127 | |
---|
[737] | 128 | # preload a default plotter |
---|
| 129 | useplotter : True |
---|
[255] | 130 | |
---|
[737] | 131 | # apply operations on the input scantable or return new one |
---|
| 132 | insitu : True |
---|
[706] | 133 | |
---|
[737] | 134 | # plotting |
---|
[710] | 135 | |
---|
[737] | 136 | # do we want a GUI or plot to a file |
---|
| 137 | plotter.gui : True |
---|
[710] | 138 | |
---|
[737] | 139 | # default mode for colour stacking |
---|
| 140 | plotter.stacking : Pol |
---|
[255] | 141 | |
---|
[737] | 142 | # default mode for panelling |
---|
| 143 | plotter.panelling : scan |
---|
[255] | 144 | |
---|
[737] | 145 | # push panels together, to share axislabels |
---|
| 146 | plotter.ganged : True |
---|
[710] | 147 | |
---|
[737] | 148 | # decimate the number of points plotted bya afactor of |
---|
| 149 | # nchan/1024 |
---|
| 150 | plotter.decimate : False |
---|
[733] | 151 | |
---|
[737] | 152 | # default colours/linestyles |
---|
| 153 | plotter.colours : |
---|
| 154 | plotter.linestyles : |
---|
[700] | 155 | |
---|
[1022] | 156 | # enable/disable histogram plotting |
---|
| 157 | plotter.histogram : False |
---|
| 158 | |
---|
[1097] | 159 | # ps paper type |
---|
| 160 | plotter.papertype : A4 |
---|
| 161 | |
---|
[737] | 162 | # scantable |
---|
[1076] | 163 | |
---|
[1259] | 164 | # default storage of scantable ('memory'/'disk') |
---|
[1076] | 165 | scantable.storage : memory |
---|
[1422] | 166 | |
---|
| 167 | # write history of each call to scantable |
---|
| 168 | scantable.history : True |
---|
| 169 | |
---|
[737] | 170 | # default ouput format when saving |
---|
| 171 | scantable.save : ASAP |
---|
[1422] | 172 | |
---|
[737] | 173 | # auto averaging on read |
---|
| 174 | scantable.autoaverage : True |
---|
[255] | 175 | |
---|
[737] | 176 | # default frequency frame to set when function |
---|
[1097] | 177 | # scantable.set_freqframe is called |
---|
[737] | 178 | scantable.freqframe : LSRK |
---|
[255] | 179 | |
---|
[737] | 180 | # Control the level of information printed by summary |
---|
| 181 | scantable.verbosesummary : False |
---|
[706] | 182 | |
---|
[1504] | 183 | # Control the identification of reference (off) scans |
---|
| 184 | # This is has to be a regular expression |
---|
| 185 | scantable.reference : .*(e|w|_R)$ |
---|
[737] | 186 | # Fitter |
---|
| 187 | """ |
---|
[706] | 188 | |
---|
[226] | 189 | def rc_params(): |
---|
| 190 | 'Return the default params updated from the values in the rc file' |
---|
[706] | 191 | |
---|
[513] | 192 | fname = _asap_fname() |
---|
[706] | 193 | |
---|
[226] | 194 | if fname is None or not os.path.exists(fname): |
---|
| 195 | message = 'could not find rc file; returning defaults' |
---|
| 196 | ret = dict([ (key, tup[0]) for key, tup in defaultParams.items()]) |
---|
| 197 | #print message |
---|
| 198 | return ret |
---|
[706] | 199 | |
---|
[226] | 200 | cnt = 0 |
---|
| 201 | for line in file(fname): |
---|
| 202 | cnt +=1 |
---|
| 203 | line = line.strip() |
---|
| 204 | if not len(line): continue |
---|
| 205 | if line.startswith('#'): continue |
---|
| 206 | tup = line.split(':',1) |
---|
| 207 | if len(tup) !=2: |
---|
| 208 | print ('Illegal line #%d\n\t%s\n\tin file "%s"' % (cnt, line, fname)) |
---|
| 209 | continue |
---|
[706] | 210 | |
---|
[226] | 211 | key, val = tup |
---|
| 212 | key = key.strip() |
---|
| 213 | if not defaultParams.has_key(key): |
---|
| 214 | print ('Bad key "%s" on line %d in %s' % (key, cnt, fname)) |
---|
| 215 | continue |
---|
[706] | 216 | |
---|
[226] | 217 | default, converter = defaultParams[key] |
---|
| 218 | |
---|
| 219 | ind = val.find('#') |
---|
| 220 | if ind>=0: val = val[:ind] # ignore trailing comments |
---|
| 221 | val = val.strip() |
---|
| 222 | try: cval = converter(val) # try to convert to proper type or raise |
---|
[1080] | 223 | except ValueError, msg: |
---|
[226] | 224 | print ('Bad val "%s" on line #%d\n\t"%s"\n\tin file "%s"\n\t%s' % (val, cnt, line, fname, msg)) |
---|
| 225 | continue |
---|
| 226 | else: |
---|
| 227 | # Alles Klar, update dict |
---|
| 228 | defaultParams[key][0] = cval |
---|
| 229 | |
---|
| 230 | # strip the conveter funcs and return |
---|
| 231 | ret = dict([ (key, tup[0]) for key, tup in defaultParams.items()]) |
---|
[466] | 232 | print ('loaded rc file %s'%fname) |
---|
[226] | 233 | |
---|
| 234 | return ret |
---|
| 235 | |
---|
| 236 | |
---|
| 237 | # this is the instance used by the asap classes |
---|
[706] | 238 | rcParams = rc_params() |
---|
[226] | 239 | |
---|
| 240 | rcParamsDefault = dict(rcParams.items()) # a copy |
---|
| 241 | |
---|
| 242 | def rc(group, **kwargs): |
---|
| 243 | """ |
---|
| 244 | Set the current rc params. Group is the grouping for the rc, eg |
---|
[379] | 245 | for scantable.save the group is 'scantable', for plotter.stacking, the |
---|
| 246 | group is 'plotter', and so on. kwargs is a list of attribute |
---|
[226] | 247 | name/value pairs, eg |
---|
| 248 | |
---|
[379] | 249 | rc('scantable', save='SDFITS') |
---|
[226] | 250 | |
---|
| 251 | sets the current rc params and is equivalent to |
---|
[706] | 252 | |
---|
[379] | 253 | rcParams['scantable.save'] = 'SDFITS' |
---|
[226] | 254 | |
---|
| 255 | Use rcdefaults to restore the default rc params after changes. |
---|
| 256 | """ |
---|
| 257 | |
---|
[379] | 258 | aliases = {} |
---|
[706] | 259 | |
---|
[226] | 260 | for k,v in kwargs.items(): |
---|
| 261 | name = aliases.get(k) or k |
---|
[1422] | 262 | if len(group): |
---|
| 263 | key = '%s.%s' % (group, name) |
---|
| 264 | else: |
---|
| 265 | key = name |
---|
[226] | 266 | if not rcParams.has_key(key): |
---|
| 267 | raise KeyError('Unrecognized key "%s" for group "%s" and name "%s"' % (key, group, name)) |
---|
[706] | 268 | |
---|
[226] | 269 | rcParams[key] = v |
---|
| 270 | |
---|
| 271 | |
---|
| 272 | def rcdefaults(): |
---|
| 273 | """ |
---|
| 274 | Restore the default rc params - the ones that were created at |
---|
| 275 | asap load time |
---|
| 276 | """ |
---|
| 277 | rcParams.update(rcParamsDefault) |
---|
| 278 | |
---|
[1295] | 279 | def _n_bools(n, val): |
---|
| 280 | return [ val for i in xrange(n) ] |
---|
[513] | 281 | |
---|
| 282 | def _is_sequence_or_number(param, ptype=int): |
---|
| 283 | if isinstance(param,tuple) or isinstance(param,list): |
---|
[928] | 284 | if len(param) == 0: return True # empty list |
---|
[513] | 285 | out = True |
---|
| 286 | for p in param: |
---|
| 287 | out &= isinstance(p,ptype) |
---|
| 288 | return out |
---|
| 289 | elif isinstance(param, ptype): |
---|
| 290 | return True |
---|
| 291 | return False |
---|
| 292 | |
---|
[928] | 293 | def _to_list(param, ptype=int): |
---|
| 294 | if isinstance(param, ptype): |
---|
| 295 | if ptype is str: return param.split() |
---|
| 296 | else: return [param] |
---|
| 297 | if _is_sequence_or_number(param, ptype): |
---|
| 298 | return param |
---|
| 299 | return None |
---|
[715] | 300 | |
---|
[944] | 301 | def unique(x): |
---|
[992] | 302 | """ |
---|
| 303 | Return the unique values in a list |
---|
| 304 | Parameters: |
---|
| 305 | x: the list to reduce |
---|
| 306 | Examples: |
---|
| 307 | x = [1,2,3,3,4] |
---|
| 308 | print unique(x) |
---|
| 309 | [1,2,3,4] |
---|
| 310 | """ |
---|
[944] | 311 | return dict([ (val, 1) for val in x]).keys() |
---|
| 312 | |
---|
[992] | 313 | def list_files(path=".",suffix="rpf"): |
---|
| 314 | """ |
---|
| 315 | Return a list files readable by asap, such as rpf, sdfits, mbf, asap |
---|
| 316 | Parameters: |
---|
| 317 | path: The directory to list (default '.') |
---|
| 318 | suffix: The file extension (default rpf) |
---|
| 319 | Example: |
---|
| 320 | files = list_files("data/","sdfits") |
---|
| 321 | print files |
---|
| 322 | ['data/2001-09-01_0332_P363.sdfits', |
---|
| 323 | 'data/2003-04-04_131152_t0002.sdfits', |
---|
| 324 | 'data/Sgr_86p262_best_SPC.sdfits'] |
---|
| 325 | """ |
---|
| 326 | if not os.path.isdir(path): |
---|
| 327 | return None |
---|
[1295] | 328 | valid = "rpf rpf.1 rpf.2 sdf sdfits mbf asap".split() |
---|
[992] | 329 | if not suffix in valid: |
---|
| 330 | return None |
---|
| 331 | files = [os.path.expanduser(os.path.expandvars(path+"/"+f)) for f in os.listdir(path)] |
---|
| 332 | return filter(lambda x: x.endswith(suffix),files) |
---|
| 333 | |
---|
[715] | 334 | # workaround for ipython, which redirects this if banner=0 in ipythonrc |
---|
| 335 | sys.stdout = sys.__stdout__ |
---|
| 336 | sys.stderr = sys.__stderr__ |
---|
| 337 | |
---|
| 338 | # Logging |
---|
| 339 | from asap._asap import Log as _asaplog |
---|
| 340 | global asaplog |
---|
[710] | 341 | asaplog=_asaplog() |
---|
[715] | 342 | if rcParams['verbose']: |
---|
| 343 | asaplog.enable() |
---|
| 344 | else: |
---|
| 345 | asaplog.disable() |
---|
| 346 | |
---|
| 347 | def print_log(): |
---|
| 348 | log = asaplog.pop() |
---|
| 349 | if len(log) and rcParams['verbose']: print log |
---|
| 350 | return |
---|
| 351 | |
---|
[1295] | 352 | def mask_and(a, b): |
---|
| 353 | assert(len(a)==len(b)) |
---|
| 354 | return [ a[i] & b[i] for i in xrange(len(a)) ] |
---|
[1134] | 355 | |
---|
[1295] | 356 | def mask_or(a, b): |
---|
| 357 | assert(len(a)==len(b)) |
---|
| 358 | return [ a[i] | b[i] for i in xrange(len(a)) ] |
---|
| 359 | |
---|
| 360 | def mask_not(a): |
---|
| 361 | return [ not i for i in a ] |
---|
| 362 | |
---|
[1117] | 363 | from asapfitter import fitter |
---|
[895] | 364 | from asapreader import reader |
---|
[944] | 365 | from selector import selector |
---|
[710] | 366 | |
---|
[100] | 367 | from asapmath import * |
---|
[1080] | 368 | from scantable import scantable |
---|
[1097] | 369 | from asaplinefind import linefinder |
---|
[1134] | 370 | from linecatalog import linecatalog |
---|
[285] | 371 | |
---|
[928] | 372 | if rcParams['useplotter']: |
---|
[1295] | 373 | try: |
---|
[1423] | 374 | from asapplotter import asapplotter |
---|
| 375 | gui = os.environ.has_key('DISPLAY') and rcParams['plotter.gui'] |
---|
| 376 | if gui: |
---|
[1422] | 377 | import matplotlib |
---|
| 378 | matplotlib.use("TkAgg") |
---|
[1423] | 379 | import pylab |
---|
[1422] | 380 | xyplotter = pylab |
---|
[1423] | 381 | plotter = asapplotter(gui) |
---|
| 382 | del gui |
---|
[1295] | 383 | except ImportError: |
---|
[1423] | 384 | print "Matplotlib not installed. No plotting available" |
---|
[285] | 385 | |
---|
[574] | 386 | __date__ = '$Date: 2009-02-18 01:00:17 +0000 (Wed, 18 Feb 2009) $'.split()[1] |
---|
[1371] | 387 | __version__ = 'trunk' |
---|
[100] | 388 | |
---|
[1193] | 389 | def is_ipython(): |
---|
[1259] | 390 | return '__IP' in dir(sys.modules["__main__"]) |
---|
[1193] | 391 | if is_ipython(): |
---|
[1014] | 392 | def version(): print "ASAP %s(%s)"% (__version__, __date__) |
---|
[1422] | 393 | |
---|
[706] | 394 | def list_scans(t = scantable): |
---|
[1295] | 395 | import types |
---|
[706] | 396 | globs = sys.modules['__main__'].__dict__.iteritems() |
---|
| 397 | print "The user created scantables are:" |
---|
| 398 | sts = map(lambda x: x[0], filter(lambda x: isinstance(x[1], t), globs)) |
---|
| 399 | print filter(lambda x: not x.startswith('_'), sts) |
---|
| 400 | return |
---|
[100] | 401 | |
---|
[715] | 402 | def commands(): |
---|
| 403 | x = """ |
---|
[113] | 404 | [The scan container] |
---|
| 405 | scantable - a container for integrations/scans |
---|
[182] | 406 | (can open asap/rpfits/sdfits and ms files) |
---|
[113] | 407 | copy - returns a copy of a scan |
---|
| 408 | get_scan - gets a specific scan out of a scantable |
---|
[984] | 409 | (by name or number) |
---|
[1093] | 410 | drop_scan - drops a specific scan out of a scantable |
---|
| 411 | (by number) |
---|
[984] | 412 | set_selection - set a new subselection of the data |
---|
| 413 | get_selection - get the current selection object |
---|
[113] | 414 | summary - print info about the scantable contents |
---|
[182] | 415 | stats - get specified statistic of the spectra in |
---|
| 416 | the scantable |
---|
| 417 | stddev - get the standard deviation of the spectra |
---|
| 418 | in the scantable |
---|
[113] | 419 | get_tsys - get the TSys |
---|
| 420 | get_time - get the timestamps of the integrations |
---|
[1351] | 421 | get_inttime - get the integration time |
---|
[733] | 422 | get_sourcename - get the source names of the scans |
---|
[794] | 423 | get_azimuth - get the azimuth of the scans |
---|
| 424 | get_elevation - get the elevation of the scans |
---|
| 425 | get_parangle - get the parallactic angle of the scans |
---|
[876] | 426 | get_unit - get the current unit |
---|
[513] | 427 | set_unit - set the abcissa unit to be used from this |
---|
| 428 | point on |
---|
[255] | 429 | get_abcissa - get the abcissa values and name for a given |
---|
| 430 | row (time) |
---|
[1259] | 431 | get_column_names - get the names of the columns in the scantable |
---|
| 432 | for use with selector.set_query |
---|
[113] | 433 | set_freqframe - set the frame info for the Spectral Axis |
---|
| 434 | (e.g. 'LSRK') |
---|
[276] | 435 | set_doppler - set the doppler to be used from this point on |
---|
[984] | 436 | set_dirframe - set the frame for the direction on the sky |
---|
[240] | 437 | set_instrument - set the instrument name |
---|
[1190] | 438 | set_feedtype - set the feed type |
---|
[255] | 439 | get_fluxunit - get the brightness flux unit |
---|
[240] | 440 | set_fluxunit - set the brightness flux unit |
---|
[1508] | 441 | set_sourcetype - set the type of the source - source or reference |
---|
[188] | 442 | create_mask - return an mask in the current unit |
---|
| 443 | for the given region. The specified regions |
---|
| 444 | are NOT masked |
---|
[255] | 445 | get_restfreqs - get the current list of rest frequencies |
---|
| 446 | set_restfreqs - set a list of rest frequencies |
---|
[1471] | 447 | shift_refpix - shift the reference pixel of the IFs |
---|
| 448 | set_spectrum - overwrite the spectrum for a given row |
---|
| 449 | get_spectrum - retrieve the spectrum for a given |
---|
| 450 | get_mask - retrieve the mask for a given |
---|
[1012] | 451 | flag - flag selected channels in the data |
---|
[1192] | 452 | lag_flag - flag specified frequency in the data |
---|
[1151] | 453 | save - save the scantable to disk as either 'ASAP', |
---|
| 454 | 'SDFITS' or 'ASCII' |
---|
[486] | 455 | nbeam,nif,nchan,npol - the number of beams/IFs/Pols/Chans |
---|
[733] | 456 | nscan - the number of scans in the scantable |
---|
[1422] | 457 | nrow - the number of spectra in the scantable |
---|
[486] | 458 | history - print the history of the scantable |
---|
[530] | 459 | get_fit - get a fit which has been stored witnh the data |
---|
[706] | 460 | average_time - return the (weighted) time average of a scan |
---|
[513] | 461 | or a list of scans |
---|
| 462 | average_pol - average the polarisations together. |
---|
[1144] | 463 | average_beam - average the beams together. |
---|
[992] | 464 | convert_pol - convert to a different polarisation type |
---|
[690] | 465 | auto_quotient - return the on/off quotient with |
---|
[1069] | 466 | automatic detection of the on/off scans (closest |
---|
| 467 | in time off is selected) |
---|
[1144] | 468 | mx_quotient - Form a quotient using MX data (off beams) |
---|
[1014] | 469 | scale, *, / - return a scan scaled by a given factor |
---|
| 470 | add, +, - - return a scan with given value added |
---|
[513] | 471 | bin - return a scan with binned channels |
---|
| 472 | resample - return a scan with resampled channels |
---|
| 473 | smooth - return the spectrally smoothed scan |
---|
| 474 | poly_baseline - fit a polynomial baseline to all Beams/IFs/Pols |
---|
[706] | 475 | auto_poly_baseline - automatically fit a polynomial baseline |
---|
[780] | 476 | recalc_azel - recalculate azimuth and elevation based on |
---|
| 477 | the pointing |
---|
[513] | 478 | gain_el - apply gain-elevation correction |
---|
| 479 | opacity - apply opacity correction |
---|
| 480 | convert_flux - convert to and from Jy and Kelvin brightness |
---|
[255] | 481 | units |
---|
[513] | 482 | freq_align - align spectra in frequency frame |
---|
[1014] | 483 | invert_phase - Invert the phase of the cross-correlation |
---|
[1351] | 484 | swap_linears - Swap XX and YY (or RR LL) |
---|
[513] | 485 | rotate_xyphase - rotate XY phase of cross correlation |
---|
| 486 | rotate_linpolphase - rotate the phase of the complex |
---|
| 487 | polarization O=Q+iU correlation |
---|
[733] | 488 | freq_switch - perform frequency switching on the data |
---|
| 489 | stats - Determine the specified statistic, e.g. 'min' |
---|
| 490 | 'max', 'rms' etc. |
---|
| 491 | stddev - Determine the standard deviation of the current |
---|
| 492 | beam/if/pol |
---|
[1014] | 493 | [Selection] |
---|
| 494 | selector - a selection object to set a subset of a scantable |
---|
| 495 | set_scans - set (a list of) scans by index |
---|
| 496 | set_cycles - set (a list of) cycles by index |
---|
| 497 | set_beams - set (a list of) beamss by index |
---|
| 498 | set_ifs - set (a list of) ifs by index |
---|
| 499 | set_polarisations - set (a list of) polarisations by name |
---|
| 500 | or by index |
---|
| 501 | set_names - set a selection by name (wildcards allowed) |
---|
| 502 | set_tsys - set a selection by tsys thresholds |
---|
[1259] | 503 | set_query - set a selection by SQL-like query, e.g. BEAMNO==1 |
---|
[1351] | 504 | ( also get_ functions for all these ) |
---|
[1014] | 505 | reset - unset all selections |
---|
[1351] | 506 | + - merge two selections |
---|
[733] | 507 | |
---|
[513] | 508 | [Math] Mainly functions which operate on more than one scantable |
---|
[100] | 509 | |
---|
[706] | 510 | average_time - return the (weighted) time average |
---|
[513] | 511 | of a list of scans |
---|
| 512 | quotient - return the on/off quotient |
---|
| 513 | simple_math - simple mathematical operations on two scantables, |
---|
| 514 | 'add', 'sub', 'mul', 'div' |
---|
[1069] | 515 | quotient - build quotient of the given on and off scans |
---|
[1351] | 516 | (matched pairs and 1 off - n on are valid) |
---|
[1117] | 517 | merge - merge a list of scantables |
---|
[1069] | 518 | |
---|
[1151] | 519 | [Line Catalog] |
---|
| 520 | linecatalog - a linecatalog wrapper, taking an ASCII or |
---|
| 521 | internal format table |
---|
| 522 | summary - print a summary of the current selection |
---|
| 523 | set_name - select a subset by name pattern, e.g. '*OH*' |
---|
| 524 | set_strength_limits - select a subset by line strength limits |
---|
| 525 | set_frequency_limits - select a subset by frequency limits |
---|
| 526 | reset - unset all selections |
---|
| 527 | save - save the current subset to a table (internal |
---|
| 528 | format) |
---|
| 529 | get_row - get the name and frequency from a specific |
---|
| 530 | row in the table |
---|
[513] | 531 | [Fitting] |
---|
[113] | 532 | fitter |
---|
| 533 | auto_fit - return a scan where the function is |
---|
| 534 | applied to all Beams/IFs/Pols. |
---|
| 535 | commit - return a new scan where the fits have been |
---|
| 536 | commited. |
---|
| 537 | fit - execute the actual fitting process |
---|
[984] | 538 | store_fit - store the fit parameters in the data (scantable) |
---|
[113] | 539 | get_chi2 - get the Chi^2 |
---|
| 540 | set_scan - set the scantable to be fit |
---|
| 541 | set_function - set the fitting function |
---|
| 542 | set_parameters - set the parameters for the function(s), and |
---|
| 543 | set if they should be held fixed during fitting |
---|
[513] | 544 | set_gauss_parameters - same as above but specialised for individual |
---|
| 545 | gaussian components |
---|
[113] | 546 | get_parameters - get the fitted parameters |
---|
[513] | 547 | plot - plot the resulting fit and/or components and |
---|
| 548 | residual |
---|
[210] | 549 | [Plotter] |
---|
| 550 | asapplotter - a plotter for asap, default plotter is |
---|
| 551 | called 'plotter' |
---|
[984] | 552 | plot - plot a scantable |
---|
[1151] | 553 | plot_lines - plot a linecatalog overlay |
---|
[378] | 554 | save - save the plot to a file ('png' ,'ps' or 'eps') |
---|
[210] | 555 | set_mode - set the state of the plotter, i.e. |
---|
| 556 | what is to be plotted 'colour stacked' |
---|
| 557 | and what 'panelled' |
---|
[984] | 558 | set_selection - only plot a selected part of the data |
---|
[733] | 559 | set_range - set a 'zoom' window [xmin,xmax,ymin,ymax] |
---|
[255] | 560 | set_legend - specify user labels for the legend indeces |
---|
| 561 | set_title - specify user labels for the panel indeces |
---|
[733] | 562 | set_abcissa - specify a user label for the abcissa |
---|
[255] | 563 | set_ordinate - specify a user label for the ordinate |
---|
[378] | 564 | set_layout - specify the multi-panel layout (rows,cols) |
---|
[733] | 565 | set_colors - specify a set of colours to use |
---|
| 566 | set_linestyles - specify a set of linestyles to use if only |
---|
| 567 | using one color |
---|
[1151] | 568 | set_font - set general font properties, e.g. 'family' |
---|
[1054] | 569 | set_histogram - plot in historam style |
---|
[733] | 570 | set_mask - set a plotting mask for a specific polarization |
---|
[1171] | 571 | text - draw text annotations either in data or relative |
---|
| 572 | coordinates |
---|
| 573 | arrow - draw arrow annotations either in data or relative |
---|
| 574 | coordinates |
---|
| 575 | axhline,axvline - draw horizontal/vertical lines |
---|
| 576 | axhspan,axvspan - draw horizontal/vertical regions |
---|
[1175] | 577 | |
---|
| 578 | xyplotter - matplotlib/pylab plotting functions |
---|
| 579 | |
---|
[182] | 580 | [Reading files] |
---|
| 581 | reader - access rpfits/sdfits files |
---|
[984] | 582 | open - attach reader to a file |
---|
| 583 | close - detach reader from file |
---|
[182] | 584 | read - read in integrations |
---|
| 585 | summary - list info about all integrations |
---|
| 586 | |
---|
[113] | 587 | [General] |
---|
| 588 | commands - this command |
---|
| 589 | print - print details about a variable |
---|
| 590 | list_scans - list all scantables created bt the user |
---|
[992] | 591 | list_files - list all files readable by asap (default rpf) |
---|
[113] | 592 | del - delete the given variable from memory |
---|
| 593 | range - create a list of values, e.g. |
---|
| 594 | range(3) = [0,1,2], range(2,5) = [2,3,4] |
---|
| 595 | help - print help for one of the listed functions |
---|
| 596 | execfile - execute an asap script, e.g. execfile('myscript') |
---|
[255] | 597 | list_rcparameters - print out a list of possible values to be |
---|
[274] | 598 | put into $HOME/.asaprc |
---|
[1171] | 599 | rc - set rc parameters from within asap |
---|
[466] | 600 | mask_and,mask_or, |
---|
| 601 | mask_not - boolean operations on masks created with |
---|
| 602 | scantable.create_mask |
---|
[706] | 603 | |
---|
[210] | 604 | Note: |
---|
| 605 | How to use this with help: |
---|
| 606 | # function 'summary' |
---|
| 607 | [xxx] is just a category |
---|
| 608 | Every 'sub-level' in this list should be replaces by a '.' Period when |
---|
[706] | 609 | using help |
---|
[210] | 610 | Example: |
---|
| 611 | ASAP> help scantable # to get info on ths scantable |
---|
| 612 | ASAP> help scantable.summary # to get help on the scantable's |
---|
| 613 | ASAP> help average_time |
---|
| 614 | |
---|
[715] | 615 | """ |
---|
[1151] | 616 | if rcParams['verbose']: |
---|
| 617 | try: |
---|
| 618 | from IPython.genutils import page as pager |
---|
| 619 | except ImportError: |
---|
| 620 | from pydoc import pager |
---|
| 621 | pager(x) |
---|
| 622 | else: |
---|
| 623 | print x |
---|
[715] | 624 | return |
---|
[113] | 625 | |
---|
[706] | 626 | def welcome(): |
---|
| 627 | return """Welcome to ASAP v%s (%s) - the ATNF Spectral Analysis Package |
---|
[100] | 628 | |
---|
[1035] | 629 | Please report any bugs via: |
---|
[1378] | 630 | http://svn.atnf.csiro.au/trac/asap/simpleticket |
---|
[100] | 631 | |
---|
[378] | 632 | [IMPORTANT: ASAP is 0-based] |
---|
[706] | 633 | Type commands() to get a list of all available ASAP commands.""" % (__version__, __date__) |
---|