source: branches/hpc34/Doxyfile@ 2611

Last change on this file since 2611 was 1359, checked in by mar637, 18 years ago

changed version number

File size: 49.4 KB
Line 
1# Doxyfile 1.5.1
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project
5#
6# All text after a hash (#) is considered a comment and will be ignored
7# The format is:
8# TAG = value [value, ...]
9# For lists items can also be appended using:
10# TAG += value [value, ...]
11# Values that contain spaces should be placed between quotes (" ")
12
13#---------------------------------------------------------------------------
14# Project related configuration options
15#---------------------------------------------------------------------------
16
17# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
18# by quotes) that should identify the project.
19
20PROJECT_NAME = asap
21
22# The PROJECT_NUMBER tag can be used to enter a project or revision number.
23# This could be handy for archiving the generated documentation or
24# if some version control system is used.
25
26PROJECT_NUMBER = 2.2.0
27
28# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
29# base path where the generated documentation will be put.
30# If a relative path is entered, it will be relative to the location
31# where doxygen was started. If left blank the current directory will be used.
32
33OUTPUT_DIRECTORY = doc/
34
35# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
36# 4096 sub-directories (in 2 levels) under the output directory of each output
37# format and will distribute the generated files over these directories.
38# Enabling this option can be useful when feeding doxygen a huge amount of
39# source files, where putting all generated files in the same directory would
40# otherwise cause performance problems for the file system.
41
42CREATE_SUBDIRS = NO
43
44# The OUTPUT_LANGUAGE tag is used to specify the language in which all
45# documentation generated by doxygen is written. Doxygen will use this
46# information to generate all constant output in the proper language.
47# The default language is English, other supported languages are:
48# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
49# Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian,
50# Italian, Japanese, Japanese-en (Japanese with English messages), Korean,
51# Korean-en, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian,
52# Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
53
54OUTPUT_LANGUAGE = English
55
56# This tag can be used to specify the encoding used in the generated output.
57# The encoding is not always determined by the language that is chosen,
58# but also whether or not the output is meant for Windows or non-Windows users.
59# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
60# forces the Windows encoding (this is the default for the Windows binary),
61# whereas setting the tag to NO uses a Unix-style encoding (the default for
62# all platforms other than Windows).
63
64USE_WINDOWS_ENCODING = NO
65
66# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
67# include brief member descriptions after the members that are listed in
68# the file and class documentation (similar to JavaDoc).
69# Set to NO to disable this.
70
71BRIEF_MEMBER_DESC = YES
72
73# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
74# the brief description of a member or function before the detailed description.
75# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
76# brief descriptions will be completely suppressed.
77
78REPEAT_BRIEF = YES
79
80# This tag implements a quasi-intelligent brief description abbreviator
81# that is used to form the text in various listings. Each string
82# in this list, if found as the leading text of the brief description, will be
83# stripped from the text and the result after processing the whole list, is
84# used as the annotated text. Otherwise, the brief description is used as-is.
85# If left blank, the following values are used ("$name" is automatically
86# replaced with the name of the entity): "The $name class" "The $name widget"
87# "The $name file" "is" "provides" "specifies" "contains"
88# "represents" "a" "an" "the"
89
90ABBREVIATE_BRIEF =
91
92# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
93# Doxygen will generate a detailed section even if there is only a brief
94# description.
95
96ALWAYS_DETAILED_SEC = NO
97
98# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
99# inherited members of a class in the documentation of that class as if those
100# members were ordinary class members. Constructors, destructors and assignment
101# operators of the base classes will not be shown.
102
103INLINE_INHERITED_MEMB = NO
104
105# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
106# path before files name in the file list and in the header files. If set
107# to NO the shortest path that makes the file name unique will be used.
108
109FULL_PATH_NAMES = NO
110
111# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
112# can be used to strip a user-defined part of the path. Stripping is
113# only done if one of the specified strings matches the left-hand part of
114# the path. The tag can be used to show relative paths in the file list.
115# If left blank the directory from which doxygen is run is used as the
116# path to strip.
117
118STRIP_FROM_PATH =
119
120# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
121# the path mentioned in the documentation of a class, which tells
122# the reader which header file to include in order to use a class.
123# If left blank only the name of the header file containing the class
124# definition is used. Otherwise one should specify the include paths that
125# are normally passed to the compiler using the -I flag.
126
127STRIP_FROM_INC_PATH =
128
129# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
130# (but less readable) file names. This can be useful is your file systems
131# doesn't support long names like on DOS, Mac, or CD-ROM.
132
133SHORT_NAMES = NO
134
135# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
136# will interpret the first line (until the first dot) of a JavaDoc-style
137# comment as the brief description. If set to NO, the JavaDoc
138# comments will behave just like the Qt-style comments (thus requiring an
139# explicit @brief command for a brief description.
140
141JAVADOC_AUTOBRIEF = NO
142
143# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
144# treat a multi-line C++ special comment block (i.e. a block of //! or ///
145# comments) as a brief description. This used to be the default behaviour.
146# The new default is to treat a multi-line C++ comment block as a detailed
147# description. Set this tag to YES if you prefer the old behaviour instead.
148
149MULTILINE_CPP_IS_BRIEF = NO
150
151# If the DETAILS_AT_TOP tag is set to YES then Doxygen
152# will output the detailed description near the top, like JavaDoc.
153# If set to NO, the detailed description appears after the member
154# documentation.
155
156DETAILS_AT_TOP = NO
157
158# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
159# member inherits the documentation from any documented member that it
160# re-implements.
161
162INHERIT_DOCS = YES
163
164# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
165# a new page for each member. If set to NO, the documentation of a member will
166# be part of the file/class/namespace that contains it.
167
168SEPARATE_MEMBER_PAGES = NO
169
170# The TAB_SIZE tag can be used to set the number of spaces in a tab.
171# Doxygen uses this value to replace tabs by spaces in code fragments.
172
173TAB_SIZE = 8
174
175# This tag can be used to specify a number of aliases that acts
176# as commands in the documentation. An alias has the form "name=value".
177# For example adding "sideeffect=\par Side Effects:\n" will allow you to
178# put the command \sideeffect (or @sideeffect) in the documentation, which
179# will result in a user-defined paragraph with heading "Side Effects:".
180# You can put \n's in the value part of an alias to insert newlines.
181
182ALIASES =
183
184# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
185# sources only. Doxygen will then generate output that is more tailored for C.
186# For instance, some of the names that are used will be different. The list
187# of all members will be omitted, etc.
188
189OPTIMIZE_OUTPUT_FOR_C = NO
190
191# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
192# sources only. Doxygen will then generate output that is more tailored for Java.
193# For instance, namespaces will be presented as packages, qualified scopes
194# will look different, etc.
195
196OPTIMIZE_OUTPUT_JAVA = NO
197
198# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
199# include (a tag file for) the STL sources as input, then you should
200# set this tag to YES in order to let doxygen match functions declarations and
201# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
202# func(std::string) {}). This also make the inheritance and collaboration
203# diagrams that involve STL classes more complete and accurate.
204
205BUILTIN_STL_SUPPORT = NO
206
207# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
208# tag is set to YES, then doxygen will reuse the documentation of the first
209# member in the group (if any) for the other members of the group. By default
210# all members of a group must be documented explicitly.
211
212DISTRIBUTE_GROUP_DOC = NO
213
214# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
215# the same type (for instance a group of public functions) to be put as a
216# subgroup of that type (e.g. under the Public Functions section). Set it to
217# NO to prevent subgrouping. Alternatively, this can be done per class using
218# the \nosubgrouping command.
219
220SUBGROUPING = YES
221
222#---------------------------------------------------------------------------
223# Build related configuration options
224#---------------------------------------------------------------------------
225
226# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
227# documentation are documented, even if no documentation was available.
228# Private class members and static file members will be hidden unless
229# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
230
231EXTRACT_ALL = NO
232
233# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
234# will be included in the documentation.
235
236EXTRACT_PRIVATE = NO
237
238# If the EXTRACT_STATIC tag is set to YES all static members of a file
239# will be included in the documentation.
240
241EXTRACT_STATIC = NO
242
243# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
244# defined locally in source files will be included in the documentation.
245# If set to NO only classes defined in header files are included.
246
247EXTRACT_LOCAL_CLASSES = YES
248
249# This flag is only useful for Objective-C code. When set to YES local
250# methods, which are defined in the implementation section but not in
251# the interface are included in the documentation.
252# If set to NO (the default) only methods in the interface are included.
253
254EXTRACT_LOCAL_METHODS = NO
255
256# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
257# undocumented members of documented classes, files or namespaces.
258# If set to NO (the default) these members will be included in the
259# various overviews, but no documentation section is generated.
260# This option has no effect if EXTRACT_ALL is enabled.
261
262HIDE_UNDOC_MEMBERS = NO
263
264# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
265# undocumented classes that are normally visible in the class hierarchy.
266# If set to NO (the default) these classes will be included in the various
267# overviews. This option has no effect if EXTRACT_ALL is enabled.
268
269HIDE_UNDOC_CLASSES = NO
270
271# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
272# friend (class|struct|union) declarations.
273# If set to NO (the default) these declarations will be included in the
274# documentation.
275
276HIDE_FRIEND_COMPOUNDS = NO
277
278# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
279# documentation blocks found inside the body of a function.
280# If set to NO (the default) these blocks will be appended to the
281# function's detailed documentation block.
282
283HIDE_IN_BODY_DOCS = NO
284
285# The INTERNAL_DOCS tag determines if documentation
286# that is typed after a \internal command is included. If the tag is set
287# to NO (the default) then the documentation will be excluded.
288# Set it to YES to include the internal documentation.
289
290INTERNAL_DOCS = NO
291
292# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
293# file names in lower-case letters. If set to YES upper-case letters are also
294# allowed. This is useful if you have classes or files whose names only differ
295# in case and if your file system supports case sensitive file names. Windows
296# and Mac users are advised to set this option to NO.
297
298CASE_SENSE_NAMES = YES
299
300# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
301# will show members with their full class and namespace scopes in the
302# documentation. If set to YES the scope will be hidden.
303
304HIDE_SCOPE_NAMES = YES
305
306# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
307# will put a list of the files that are included by a file in the documentation
308# of that file.
309
310SHOW_INCLUDE_FILES = YES
311
312# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
313# is inserted in the documentation for inline members.
314
315INLINE_INFO = YES
316
317# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
318# will sort the (detailed) documentation of file and class members
319# alphabetically by member name. If set to NO the members will appear in
320# declaration order.
321
322SORT_MEMBER_DOCS = YES
323
324# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
325# brief documentation of file, namespace and class members alphabetically
326# by member name. If set to NO (the default) the members will appear in
327# declaration order.
328
329SORT_BRIEF_DOCS = NO
330
331# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
332# sorted by fully-qualified names, including namespaces. If set to
333# NO (the default), the class list will be sorted only by class name,
334# not including the namespace part.
335# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
336# Note: This option applies only to the class list, not to the
337# alphabetical list.
338
339SORT_BY_SCOPE_NAME = NO
340
341# The GENERATE_TODOLIST tag can be used to enable (YES) or
342# disable (NO) the todo list. This list is created by putting \todo
343# commands in the documentation.
344
345GENERATE_TODOLIST = YES
346
347# The GENERATE_TESTLIST tag can be used to enable (YES) or
348# disable (NO) the test list. This list is created by putting \test
349# commands in the documentation.
350
351GENERATE_TESTLIST = YES
352
353# The GENERATE_BUGLIST tag can be used to enable (YES) or
354# disable (NO) the bug list. This list is created by putting \bug
355# commands in the documentation.
356
357GENERATE_BUGLIST = YES
358
359# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
360# disable (NO) the deprecated list. This list is created by putting
361# \deprecated commands in the documentation.
362
363GENERATE_DEPRECATEDLIST = YES
364
365# The ENABLED_SECTIONS tag can be used to enable conditional
366# documentation sections, marked by \if sectionname ... \endif.
367
368ENABLED_SECTIONS =
369
370# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
371# the initial value of a variable or define consists of for it to appear in
372# the documentation. If the initializer consists of more lines than specified
373# here it will be hidden. Use a value of 0 to hide initializers completely.
374# The appearance of the initializer of individual variables and defines in the
375# documentation can be controlled using \showinitializer or \hideinitializer
376# command in the documentation regardless of this setting.
377
378MAX_INITIALIZER_LINES = 30
379
380# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
381# at the bottom of the documentation of classes and structs. If set to YES the
382# list will mention the files that were used to generate the documentation.
383
384SHOW_USED_FILES = YES
385
386# If the sources in your project are distributed over multiple directories
387# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
388# in the documentation. The default is NO.
389
390SHOW_DIRECTORIES = NO
391
392# The FILE_VERSION_FILTER tag can be used to specify a program or script that
393# doxygen should invoke to get the current version for each file (typically from the
394# version control system). Doxygen will invoke the program by executing (via
395# popen()) the command <command> <input-file>, where <command> is the value of
396# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
397# provided by doxygen. Whatever the program writes to standard output
398# is used as the file version. See the manual for examples.
399
400FILE_VERSION_FILTER =
401
402#---------------------------------------------------------------------------
403# configuration options related to warning and progress messages
404#---------------------------------------------------------------------------
405
406# The QUIET tag can be used to turn on/off the messages that are generated
407# by doxygen. Possible values are YES and NO. If left blank NO is used.
408
409QUIET = NO
410
411# The WARNINGS tag can be used to turn on/off the warning messages that are
412# generated by doxygen. Possible values are YES and NO. If left blank
413# NO is used.
414
415WARNINGS = YES
416
417# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
418# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
419# automatically be disabled.
420
421WARN_IF_UNDOCUMENTED = NO
422
423# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
424# potential errors in the documentation, such as not documenting some
425# parameters in a documented function, or documenting parameters that
426# don't exist or using markup commands wrongly.
427
428WARN_IF_DOC_ERROR = YES
429
430# This WARN_NO_PARAMDOC option can be abled to get warnings for
431# functions that are documented, but have no documentation for their parameters
432# or return value. If set to NO (the default) doxygen will only warn about
433# wrong or incomplete parameter documentation, but not about the absence of
434# documentation.
435
436WARN_NO_PARAMDOC = NO
437
438# The WARN_FORMAT tag determines the format of the warning messages that
439# doxygen can produce. The string should contain the $file, $line, and $text
440# tags, which will be replaced by the file and line number from which the
441# warning originated and the warning text. Optionally the format may contain
442# $version, which will be replaced by the version of the file (if it could
443# be obtained via FILE_VERSION_FILTER)
444
445WARN_FORMAT = "$file:$line: $text"
446
447# The WARN_LOGFILE tag can be used to specify a file to which warning
448# and error messages should be written. If left blank the output is written
449# to stderr.
450
451WARN_LOGFILE =
452
453#---------------------------------------------------------------------------
454# configuration options related to the input files
455#---------------------------------------------------------------------------
456
457# The INPUT tag can be used to specify the files and/or directories that contain
458# documented source files. You may enter file names like "myfile.cpp" or
459# directories like "/usr/src/myproject". Separate the files or directories
460# with spaces.
461
462INPUT = src
463
464# If the value of the INPUT tag contains directories, you can use the
465# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
466# and *.h) to filter out the source-files in the directories. If left
467# blank the following patterns are tested:
468# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
469# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
470
471FILE_PATTERNS =
472
473# The RECURSIVE tag can be used to turn specify whether or not subdirectories
474# should be searched for input files as well. Possible values are YES and NO.
475# If left blank NO is used.
476
477RECURSIVE = NO
478
479# The EXCLUDE tag can be used to specify files and/or directories that should
480# excluded from the INPUT source files. This way you can easily exclude a
481# subdirectory from a directory tree whose root is specified with the INPUT tag.
482
483EXCLUDE =
484
485# The EXCLUDE_SYMLINKS tag can be used select whether or not files or
486# directories that are symbolic links (a Unix filesystem feature) are excluded
487# from the input.
488
489EXCLUDE_SYMLINKS = NO
490
491# If the value of the INPUT tag contains directories, you can use the
492# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
493# certain files from those directories. Note that the wildcards are matched
494# against the file with absolute path, so to exclude all test directories
495# for example use the pattern */test/*
496
497EXCLUDE_PATTERNS =
498
499# The EXAMPLE_PATH tag can be used to specify one or more files or
500# directories that contain example code fragments that are included (see
501# the \include command).
502
503EXAMPLE_PATH =
504
505# If the value of the EXAMPLE_PATH tag contains directories, you can use the
506# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
507# and *.h) to filter out the source-files in the directories. If left
508# blank all files are included.
509
510EXAMPLE_PATTERNS =
511
512# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
513# searched for input files to be used with the \include or \dontinclude
514# commands irrespective of the value of the RECURSIVE tag.
515# Possible values are YES and NO. If left blank NO is used.
516
517EXAMPLE_RECURSIVE = NO
518
519# The IMAGE_PATH tag can be used to specify one or more files or
520# directories that contain image that are included in the documentation (see
521# the \image command).
522
523IMAGE_PATH =
524
525# The INPUT_FILTER tag can be used to specify a program that doxygen should
526# invoke to filter for each input file. Doxygen will invoke the filter program
527# by executing (via popen()) the command <filter> <input-file>, where <filter>
528# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
529# input file. Doxygen will then use the output that the filter program writes
530# to standard output. If FILTER_PATTERNS is specified, this tag will be
531# ignored.
532
533INPUT_FILTER =
534
535# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
536# basis. Doxygen will compare the file name with each pattern and apply the
537# filter if there is a match. The filters are a list of the form:
538# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
539# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
540# is applied to all files.
541
542FILTER_PATTERNS =
543
544# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
545# INPUT_FILTER) will be used to filter the input files when producing source
546# files to browse (i.e. when SOURCE_BROWSER is set to YES).
547
548FILTER_SOURCE_FILES = NO
549
550#---------------------------------------------------------------------------
551# configuration options related to source browsing
552#---------------------------------------------------------------------------
553
554# If the SOURCE_BROWSER tag is set to YES then a list of source files will
555# be generated. Documented entities will be cross-referenced with these sources.
556# Note: To get rid of all source code in the generated output, make sure also
557# VERBATIM_HEADERS is set to NO.
558
559SOURCE_BROWSER = NO
560
561# Setting the INLINE_SOURCES tag to YES will include the body
562# of functions and classes directly in the documentation.
563
564INLINE_SOURCES = NO
565
566# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
567# doxygen to hide any special comment blocks from generated source code
568# fragments. Normal C and C++ comments will always remain visible.
569
570STRIP_CODE_COMMENTS = YES
571
572# If the REFERENCED_BY_RELATION tag is set to YES (the default)
573# then for each documented function all documented
574# functions referencing it will be listed.
575
576REFERENCED_BY_RELATION = YES
577
578# If the REFERENCES_RELATION tag is set to YES (the default)
579# then for each documented function all documented entities
580# called/used by that function will be listed.
581
582REFERENCES_RELATION = YES
583
584# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
585# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
586# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
587# link to the source code. Otherwise they will link to the documentstion.
588
589REFERENCES_LINK_SOURCE = YES
590
591# If the USE_HTAGS tag is set to YES then the references to source code
592# will point to the HTML generated by the htags(1) tool instead of doxygen
593# built-in source browser. The htags tool is part of GNU's global source
594# tagging system (see http://www.gnu.org/software/global/global.html). You
595# will need version 4.8.6 or higher.
596
597USE_HTAGS = NO
598
599# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
600# will generate a verbatim copy of the header file for each class for
601# which an include is specified. Set to NO to disable this.
602
603VERBATIM_HEADERS = YES
604
605#---------------------------------------------------------------------------
606# configuration options related to the alphabetical class index
607#---------------------------------------------------------------------------
608
609# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
610# of all compounds will be generated. Enable this if the project
611# contains a lot of classes, structs, unions or interfaces.
612
613ALPHABETICAL_INDEX = NO
614
615# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
616# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
617# in which this list will be split (can be a number in the range [1..20])
618
619COLS_IN_ALPHA_INDEX = 5
620
621# In case all classes in a project start with a common prefix, all
622# classes will be put under the same header in the alphabetical index.
623# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
624# should be ignored while generating the index headers.
625
626IGNORE_PREFIX =
627
628#---------------------------------------------------------------------------
629# configuration options related to the HTML output
630#---------------------------------------------------------------------------
631
632# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
633# generate HTML output.
634
635GENERATE_HTML = YES
636
637# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
638# If a relative path is entered the value of OUTPUT_DIRECTORY will be
639# put in front of it. If left blank `html' will be used as the default path.
640
641HTML_OUTPUT = html
642
643# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
644# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
645# doxygen will generate files with .html extension.
646
647HTML_FILE_EXTENSION = .html
648
649# The HTML_HEADER tag can be used to specify a personal HTML header for
650# each generated HTML page. If it is left blank doxygen will generate a
651# standard header.
652
653HTML_HEADER =
654
655# The HTML_FOOTER tag can be used to specify a personal HTML footer for
656# each generated HTML page. If it is left blank doxygen will generate a
657# standard footer.
658
659HTML_FOOTER =
660
661# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
662# style sheet that is used by each HTML page. It can be used to
663# fine-tune the look of the HTML output. If the tag is left blank doxygen
664# will generate a default style sheet. Note that doxygen will try to copy
665# the style sheet file to the HTML output directory, so don't put your own
666# stylesheet in the HTML output directory as well, or it will be erased!
667
668HTML_STYLESHEET =
669
670# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
671# files or namespaces will be aligned in HTML using tables. If set to
672# NO a bullet list will be used.
673
674HTML_ALIGN_MEMBERS = YES
675
676# If the GENERATE_HTMLHELP tag is set to YES, additional index files
677# will be generated that can be used as input for tools like the
678# Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
679# of the generated HTML documentation.
680
681GENERATE_HTMLHELP = NO
682
683# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
684# be used to specify the file name of the resulting .chm file. You
685# can add a path in front of the file if the result should not be
686# written to the html output directory.
687
688CHM_FILE =
689
690# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
691# be used to specify the location (absolute path including file name) of
692# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
693# the HTML help compiler on the generated index.hhp.
694
695HHC_LOCATION =
696
697# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
698# controls if a separate .chi index file is generated (YES) or that
699# it should be included in the master .chm file (NO).
700
701GENERATE_CHI = NO
702
703# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
704# controls whether a binary table of contents is generated (YES) or a
705# normal table of contents (NO) in the .chm file.
706
707BINARY_TOC = NO
708
709# The TOC_EXPAND flag can be set to YES to add extra items for group members
710# to the contents of the HTML help documentation and to the tree view.
711
712TOC_EXPAND = NO
713
714# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
715# top of each HTML page. The value NO (the default) enables the index and
716# the value YES disables it.
717
718DISABLE_INDEX = NO
719
720# This tag can be used to set the number of enum values (range [1..20])
721# that doxygen will group on one line in the generated HTML documentation.
722
723ENUM_VALUES_PER_LINE = 4
724
725# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
726# generated containing a tree-like index structure (just like the one that
727# is generated for HTML Help). For this to work a browser that supports
728# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
729# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
730# probably better off using the HTML help feature.
731
732GENERATE_TREEVIEW = NO
733
734# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
735# used to set the initial width (in pixels) of the frame in which the tree
736# is shown.
737
738TREEVIEW_WIDTH = 250
739
740#---------------------------------------------------------------------------
741# configuration options related to the LaTeX output
742#---------------------------------------------------------------------------
743
744# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
745# generate Latex output.
746
747GENERATE_LATEX = YES
748
749# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
750# If a relative path is entered the value of OUTPUT_DIRECTORY will be
751# put in front of it. If left blank `latex' will be used as the default path.
752
753LATEX_OUTPUT = latex
754
755# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
756# invoked. If left blank `latex' will be used as the default command name.
757
758LATEX_CMD_NAME = latex
759
760# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
761# generate index for LaTeX. If left blank `makeindex' will be used as the
762# default command name.
763
764MAKEINDEX_CMD_NAME = makeindex
765
766# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
767# LaTeX documents. This may be useful for small projects and may help to
768# save some trees in general.
769
770COMPACT_LATEX = NO
771
772# The PAPER_TYPE tag can be used to set the paper type that is used
773# by the printer. Possible values are: a4, a4wide, letter, legal and
774# executive. If left blank a4wide will be used.
775
776PAPER_TYPE = a4wide
777
778# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
779# packages that should be included in the LaTeX output.
780
781EXTRA_PACKAGES =
782
783# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
784# the generated latex document. The header should contain everything until
785# the first chapter. If it is left blank doxygen will generate a
786# standard header. Notice: only use this tag if you know what you are doing!
787
788LATEX_HEADER =
789
790# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
791# is prepared for conversion to pdf (using ps2pdf). The pdf file will
792# contain links (just like the HTML output) instead of page references
793# This makes the output suitable for online browsing using a pdf viewer.
794
795PDF_HYPERLINKS = NO
796
797# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
798# plain latex in the generated Makefile. Set this option to YES to get a
799# higher quality PDF documentation.
800
801USE_PDFLATEX = NO
802
803# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
804# command to the generated LaTeX files. This will instruct LaTeX to keep
805# running if errors occur, instead of asking the user for help.
806# This option is also used when generating formulas in HTML.
807
808LATEX_BATCHMODE = NO
809
810# If LATEX_HIDE_INDICES is set to YES then doxygen will not
811# include the index chapters (such as File Index, Compound Index, etc.)
812# in the output.
813
814LATEX_HIDE_INDICES = NO
815
816#---------------------------------------------------------------------------
817# configuration options related to the RTF output
818#---------------------------------------------------------------------------
819
820# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
821# The RTF output is optimized for Word 97 and may not look very pretty with
822# other RTF readers or editors.
823
824GENERATE_RTF = NO
825
826# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
827# If a relative path is entered the value of OUTPUT_DIRECTORY will be
828# put in front of it. If left blank `rtf' will be used as the default path.
829
830RTF_OUTPUT = rtf
831
832# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
833# RTF documents. This may be useful for small projects and may help to
834# save some trees in general.
835
836COMPACT_RTF = NO
837
838# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
839# will contain hyperlink fields. The RTF file will
840# contain links (just like the HTML output) instead of page references.
841# This makes the output suitable for online browsing using WORD or other
842# programs which support those fields.
843# Note: wordpad (write) and others do not support links.
844
845RTF_HYPERLINKS = NO
846
847# Load stylesheet definitions from file. Syntax is similar to doxygen's
848# config file, i.e. a series of assignments. You only have to provide
849# replacements, missing definitions are set to their default value.
850
851RTF_STYLESHEET_FILE =
852
853# Set optional variables used in the generation of an rtf document.
854# Syntax is similar to doxygen's config file.
855
856RTF_EXTENSIONS_FILE =
857
858#---------------------------------------------------------------------------
859# configuration options related to the man page output
860#---------------------------------------------------------------------------
861
862# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
863# generate man pages
864
865GENERATE_MAN = NO
866
867# The MAN_OUTPUT tag is used to specify where the man pages will be put.
868# If a relative path is entered the value of OUTPUT_DIRECTORY will be
869# put in front of it. If left blank `man' will be used as the default path.
870
871MAN_OUTPUT = man
872
873# The MAN_EXTENSION tag determines the extension that is added to
874# the generated man pages (default is the subroutine's section .3)
875
876MAN_EXTENSION = .3
877
878# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
879# then it will generate one additional man file for each entity
880# documented in the real man page(s). These additional files
881# only source the real man page, but without them the man command
882# would be unable to find the correct page. The default is NO.
883
884MAN_LINKS = NO
885
886#---------------------------------------------------------------------------
887# configuration options related to the XML output
888#---------------------------------------------------------------------------
889
890# If the GENERATE_XML tag is set to YES Doxygen will
891# generate an XML file that captures the structure of
892# the code including all documentation.
893
894GENERATE_XML = NO
895
896# The XML_OUTPUT tag is used to specify where the XML pages will be put.
897# If a relative path is entered the value of OUTPUT_DIRECTORY will be
898# put in front of it. If left blank `xml' will be used as the default path.
899
900XML_OUTPUT = xml
901
902# The XML_SCHEMA tag can be used to specify an XML schema,
903# which can be used by a validating XML parser to check the
904# syntax of the XML files.
905
906XML_SCHEMA =
907
908# The XML_DTD tag can be used to specify an XML DTD,
909# which can be used by a validating XML parser to check the
910# syntax of the XML files.
911
912XML_DTD =
913
914# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
915# dump the program listings (including syntax highlighting
916# and cross-referencing information) to the XML output. Note that
917# enabling this will significantly increase the size of the XML output.
918
919XML_PROGRAMLISTING = YES
920
921#---------------------------------------------------------------------------
922# configuration options for the AutoGen Definitions output
923#---------------------------------------------------------------------------
924
925# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
926# generate an AutoGen Definitions (see autogen.sf.net) file
927# that captures the structure of the code including all
928# documentation. Note that this feature is still experimental
929# and incomplete at the moment.
930
931GENERATE_AUTOGEN_DEF = NO
932
933#---------------------------------------------------------------------------
934# configuration options related to the Perl module output
935#---------------------------------------------------------------------------
936
937# If the GENERATE_PERLMOD tag is set to YES Doxygen will
938# generate a Perl module file that captures the structure of
939# the code including all documentation. Note that this
940# feature is still experimental and incomplete at the
941# moment.
942
943GENERATE_PERLMOD = NO
944
945# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
946# the necessary Makefile rules, Perl scripts and LaTeX code to be able
947# to generate PDF and DVI output from the Perl module output.
948
949PERLMOD_LATEX = NO
950
951# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
952# nicely formatted so it can be parsed by a human reader. This is useful
953# if you want to understand what is going on. On the other hand, if this
954# tag is set to NO the size of the Perl module output will be much smaller
955# and Perl will parse it just the same.
956
957PERLMOD_PRETTY = YES
958
959# The names of the make variables in the generated doxyrules.make file
960# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
961# This is useful so different doxyrules.make files included by the same
962# Makefile don't overwrite each other's variables.
963
964PERLMOD_MAKEVAR_PREFIX =
965
966#---------------------------------------------------------------------------
967# Configuration options related to the preprocessor
968#---------------------------------------------------------------------------
969
970# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
971# evaluate all C-preprocessor directives found in the sources and include
972# files.
973
974ENABLE_PREPROCESSING = YES
975
976# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
977# names in the source code. If set to NO (the default) only conditional
978# compilation will be performed. Macro expansion can be done in a controlled
979# way by setting EXPAND_ONLY_PREDEF to YES.
980
981MACRO_EXPANSION = NO
982
983# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
984# then the macro expansion is limited to the macros specified with the
985# PREDEFINED and EXPAND_AS_DEFINED tags.
986
987EXPAND_ONLY_PREDEF = NO
988
989# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
990# in the INCLUDE_PATH (see below) will be search if a #include is found.
991
992SEARCH_INCLUDES = YES
993
994# The INCLUDE_PATH tag can be used to specify one or more directories that
995# contain include files that are not input files but should be processed by
996# the preprocessor.
997
998INCLUDE_PATH =
999
1000# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1001# patterns (like *.h and *.hpp) to filter out the header-files in the
1002# directories. If left blank, the patterns specified with FILE_PATTERNS will
1003# be used.
1004
1005INCLUDE_FILE_PATTERNS =
1006
1007# The PREDEFINED tag can be used to specify one or more macro names that
1008# are defined before the preprocessor is started (similar to the -D option of
1009# gcc). The argument of the tag is a list of macros of the form: name
1010# or name=definition (no spaces). If the definition and the = are
1011# omitted =1 is assumed. To prevent a macro definition from being
1012# undefined via #undef or recursively expanded use the := operator
1013# instead of the = operator.
1014
1015PREDEFINED =
1016
1017# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1018# this tag can be used to specify a list of macro names that should be expanded.
1019# The macro definition that is found in the sources will be used.
1020# Use the PREDEFINED tag if you want to use a different macro definition.
1021
1022EXPAND_AS_DEFINED =
1023
1024# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1025# doxygen's preprocessor will remove all function-like macros that are alone
1026# on a line, have an all uppercase name, and do not end with a semicolon. Such
1027# function macros are typically used for boiler-plate code, and will confuse
1028# the parser if not removed.
1029
1030SKIP_FUNCTION_MACROS = YES
1031
1032#---------------------------------------------------------------------------
1033# Configuration::additions related to external references
1034#---------------------------------------------------------------------------
1035
1036# The TAGFILES option can be used to specify one or more tagfiles.
1037# Optionally an initial location of the external documentation
1038# can be added for each tagfile. The format of a tag file without
1039# this location is as follows:
1040# TAGFILES = file1 file2 ...
1041# Adding location for the tag files is done as follows:
1042# TAGFILES = file1=loc1 "file2 = loc2" ...
1043# where "loc1" and "loc2" can be relative or absolute paths or
1044# URLs. If a location is present for each tag, the installdox tool
1045# does not have to be run to correct the links.
1046# Note that each tag file must have a unique name
1047# (where the name does NOT include the path)
1048# If a tag file is not located in the directory in which doxygen
1049# is run, you must also specify the path to the tagfile here.
1050
1051TAGFILES =
1052
1053# When a file name is specified after GENERATE_TAGFILE, doxygen will create
1054# a tag file that is based on the input files it reads.
1055
1056GENERATE_TAGFILE =
1057
1058# If the ALLEXTERNALS tag is set to YES all external classes will be listed
1059# in the class index. If set to NO only the inherited external classes
1060# will be listed.
1061
1062ALLEXTERNALS = NO
1063
1064# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1065# in the modules index. If set to NO, only the current project's groups will
1066# be listed.
1067
1068EXTERNAL_GROUPS = YES
1069
1070# The PERL_PATH should be the absolute path and name of the perl script
1071# interpreter (i.e. the result of `which perl').
1072
1073PERL_PATH = /usr/bin/perl
1074
1075#---------------------------------------------------------------------------
1076# Configuration options related to the dot tool
1077#---------------------------------------------------------------------------
1078
1079# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1080# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1081# or super classes. Setting the tag to NO turns the diagrams off. Note that
1082# this option is superseded by the HAVE_DOT option below. This is only a
1083# fallback. It is recommended to install and use dot, since it yields more
1084# powerful graphs.
1085
1086CLASS_DIAGRAMS = YES
1087
1088# If set to YES, the inheritance and collaboration graphs will hide
1089# inheritance and usage relations if the target is undocumented
1090# or is not a class.
1091
1092HIDE_UNDOC_RELATIONS = YES
1093
1094# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1095# available from the path. This tool is part of Graphviz, a graph visualization
1096# toolkit from AT&T and Lucent Bell Labs. The other options in this section
1097# have no effect if this option is set to NO (the default)
1098
1099HAVE_DOT = NO
1100
1101# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1102# will generate a graph for each documented class showing the direct and
1103# indirect inheritance relations. Setting this tag to YES will force the
1104# the CLASS_DIAGRAMS tag to NO.
1105
1106CLASS_GRAPH = YES
1107
1108# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1109# will generate a graph for each documented class showing the direct and
1110# indirect implementation dependencies (inheritance, containment, and
1111# class references variables) of the class with other documented classes.
1112
1113COLLABORATION_GRAPH = YES
1114
1115# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1116# will generate a graph for groups, showing the direct groups dependencies
1117
1118GROUP_GRAPHS = YES
1119
1120# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1121# collaboration diagrams in a style similar to the OMG's Unified Modeling
1122# Language.
1123
1124UML_LOOK = NO
1125
1126# If set to YES, the inheritance and collaboration graphs will show the
1127# relations between templates and their instances.
1128
1129TEMPLATE_RELATIONS = NO
1130
1131# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1132# tags are set to YES then doxygen will generate a graph for each documented
1133# file showing the direct and indirect include dependencies of the file with
1134# other documented files.
1135
1136INCLUDE_GRAPH = YES
1137
1138# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1139# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1140# documented header file showing the documented files that directly or
1141# indirectly include this file.
1142
1143INCLUDED_BY_GRAPH = YES
1144
1145# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1146# generate a call dependency graph for every global function or class method.
1147# Note that enabling this option will significantly increase the time of a run.
1148# So in most cases it will be better to enable call graphs for selected
1149# functions only using the \callgraph command.
1150
1151CALL_GRAPH = NO
1152
1153# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1154# generate a caller dependency graph for every global function or class method.
1155# Note that enabling this option will significantly increase the time of a run.
1156# So in most cases it will be better to enable caller graphs for selected
1157# functions only using the \callergraph command.
1158
1159CALLER_GRAPH = NO
1160
1161# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1162# will graphical hierarchy of all classes instead of a textual one.
1163
1164GRAPHICAL_HIERARCHY = YES
1165
1166# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1167# then doxygen will show the dependencies a directory has on other directories
1168# in a graphical way. The dependency relations are determined by the #include
1169# relations between the files in the directories.
1170
1171DIRECTORY_GRAPH = YES
1172
1173# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1174# generated by dot. Possible values are png, jpg, or gif
1175# If left blank png will be used.
1176
1177DOT_IMAGE_FORMAT = png
1178
1179# The tag DOT_PATH can be used to specify the path where the dot tool can be
1180# found. If left blank, it is assumed the dot tool can be found in the path.
1181
1182DOT_PATH =
1183
1184# The DOTFILE_DIRS tag can be used to specify one or more directories that
1185# contain dot files that are included in the documentation (see the
1186# \dotfile command).
1187
1188DOTFILE_DIRS =
1189
1190# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1191# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1192# this value, doxygen will try to truncate the graph, so that it fits within
1193# the specified constraint. Beware that most browsers cannot cope with very
1194# large images.
1195
1196MAX_DOT_GRAPH_WIDTH = 1024
1197
1198# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1199# (in pixels) of the graphs generated by dot. If a graph becomes larger than
1200# this value, doxygen will try to truncate the graph, so that it fits within
1201# the specified constraint. Beware that most browsers cannot cope with very
1202# large images.
1203
1204MAX_DOT_GRAPH_HEIGHT = 1024
1205
1206# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1207# graphs generated by dot. A depth value of 3 means that only nodes reachable
1208# from the root by following a path via at most 3 edges will be shown. Nodes
1209# that lay further from the root node will be omitted. Note that setting this
1210# option to 1 or 2 may greatly reduce the computation time needed for large
1211# code bases. Also note that a graph may be further truncated if the graph's
1212# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
1213# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
1214# the graph is not depth-constrained.
1215
1216MAX_DOT_GRAPH_DEPTH = 0
1217
1218# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1219# background. This is disabled by default, which results in a white background.
1220# Warning: Depending on the platform used, enabling this option may lead to
1221# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
1222# read).
1223
1224DOT_TRANSPARENT = NO
1225
1226# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1227# files in one run (i.e. multiple -o and -T options on the command line). This
1228# makes dot run faster, but since only newer versions of dot (>1.8.10)
1229# support this, this feature is disabled by default.
1230
1231DOT_MULTI_TARGETS = NO
1232
1233# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1234# generate a legend page explaining the meaning of the various boxes and
1235# arrows in the dot generated graphs.
1236
1237GENERATE_LEGEND = YES
1238
1239# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1240# remove the intermediate dot files that are used to generate
1241# the various graphs.
1242
1243DOT_CLEANUP = YES
1244
1245#---------------------------------------------------------------------------
1246# Configuration::additions related to the search engine
1247#---------------------------------------------------------------------------
1248
1249# The SEARCHENGINE tag specifies whether or not a search engine should be
1250# used. If set to NO the values of all tags below this one will be ignored.
1251
1252SEARCHENGINE = NO
Note: See TracBrowser for help on using the repository browser.